Tabs & Foils & Current Collector
CCCu-20ss
512,1 € (net)
Conductive carbon-coated copper foil can replace conventional Al foil as a better anode substrate with improved properties.
- Better electrical conductivity and less internal resistivity
- Better mechanical strength and toughness to avoid short circuit caused by dendrite growth
- Better coating strength with electrode material
- Therefore, it will provide larger discharging capability and longer service life for Li-Ion batteries
bcaf-12u-180-HD
340,6 € (net)
The high dyne value aluminum foil with high roughness that is able to provide high adhesive property with active coating material.
- Material: Aluminum, Purity > 99.7%
- Width: 180 mm
Thickness: ~12±1 um
- Area Density: 35.17±1.5 g/㎡
- Dyne Value: ≥66
- Resistance: 2mΩ
- Tensile Strength: ≥200Mpa
CCAL-16u180ss
454,9 € (net)
Conductive carbon-coated aluminum foil can replace conventional Al foil as battery cathode substrate with improved properties
- Better electrical conductivity and less internal resistivity
- Better mechanical strength and toughness to avoid short circuits caused by dendrite growth
- Improved adhesion to the electrode material
- Provides larger discharging capability and longer service life for Li-Ion batteries
bcnf-16m
421,8 € (net)
Nickel Foam for Battery Cathode Substrate or Solid-State Electrolyte Support (1m length x 300mm width x 1.6mm thickness) EQ-bcnf-16m.
MF-Ni301
454,9 € (net)
Spooled Nickel Welding Strip 3 mm Width x 0.1 mm Thickness, 2 kg/pack, MF-Ni301.
LiB-ST
33,1 € (net)
This strapping tape is primarily used for strapping/fixing the battery core (electrodes wrapped by separator before being sealed into case)
of pouch/cylinder cell as well as good insulation functionality. Its material is based on polyethylene terephthalate (PET in short) coated with the specific
acrylic adhesive, which has strong resistance to Li-ion battery electrolyte.
MTI-TAPE-B00H
101,7 € (net)
For MTI furnace Maintenance, repair and operations only.
- Upper Temperature Range: 500 Degrees
- Material Type: Polyimide
- Overall Width: 1.0 inches
- Overall Length: 36.0 yards
- Tensile Strength: Max 30 PSI
- Thickness: 0.0040 inches
- Color: Amber
For more technical details:
PLiB-HMA4L200
273,2 € (net)
This hot melt adhesive/sealant is a must-have item specifically made for sealing tabs (Nickel or Aluminum) in between aluminum-made lamination film (pouch cell case).
You can find all MTI Tabs & Foils & Current Collector here:
https://mtixtl.com/en-euea/collections/tabs-foils-current-collector
PLiB-NTA4
56 € (net)
4mm Width Nickel Tab with Adhesive Polymer Tape as Negative Terminal for Pouch Cell, 50pcs/Box - PLiB-NTA4.